-1.6 Spring Follow up review-
I believe the stock spring is the 1.6 - after a month of playing I've lost 10fps - and the pistol is shooting 89-99fps again. Which is basically what stock pistol was shooting. Skip this and go for the 1.8 spring instead.


-Slide Release-
I find these give more grip than the stock slide releases. But your fingers don't sit as deep in on the slide when you prime.
NOTE: They are a real PITA to install. You need to hold the spring in place while you line up the pin - then push the retaining pin back through the spring and alloy part. Do you need em?....mmmm....Personal preferance IMO.


-1.8 Spring-
After installing the 1.8 spring, the prime is noticably harder. FPS = 122-126. I'll see if the spring breaks-in after a month of use. Hopefully it will stay in the 120fps range. No internal alloy upgrades required....yet!. If you like to MOD - then you want this upgrade now. Its cheap and easy to install.


-Brass Barrel (stock length 134mm)-
The stock aluminium barrel was loose - used Gen 3 darts would drop right through. The Brass barrel has a tighter fit so they they don't fall out if you carry the pistol primed. If you are using NEW darts every time - you will probably be okay with the stock aluminium barrel. But I use darts at lease 2-3 time before they break. The used darts seemed snug in the brass barrel. I wish it was slightly tighter still. Another cheap but decent upgrade.
NOTE:the Pistol is slightly front heavy with the brass barrel installed. But it looks so cool!

NERF OUT!